Description: USB G2 Input Single Relay Module 24VAC
This module uses a relay to control the input of P0.0. The relay coil voltage is 24VAC.
User must solder two wire to the coil side of the relay to use. And drill hole for the wire to exit the plastic case.
Powered and controller via the USB port.
Includes: 2M USB Mini Cable
Dimensions: 1.38" x 2.36" x 0.79"
Coil input voltage also available in 5VDC, 12VDC, 24VAC and 120VAC.
DECLARATION OF CONFORMITY
|
USB HID G2 Datasheet | USB HID G2 Datasheet. Datasheet for all the Delcom USB HID products. | |
890672 | Delcom Setup Utility | |
900000 | Delcom GEN2 USB HID Examples and Documentation | 902100 | Delcom Modules |
|