Description: USB Push To Talk Microphone w/XLR and external input jack from remote PTT switch.
Base Dimensions: 6.25"x4.25"x1.9"
Includes: 16" GooseNeck Mic, 6ft(2Meter) USB cable and XLR cable.
MIC: Moving coil dynamic, uni-directional, 100Hz-12Khz, -76dB+/-3dB, S/N ratio >65dB.
Audio Output: XLR Microphone level
*Requires an external microphone preamplifier to convert to line level output.
Bicolor LED: Green when device is powered up and red when button is held down.
External jack is a mono(2 conductor) 3.5mm female jack used to remotely actuate the PTT button.
Momentary Switch can be programmed for four modes; KEYBOARD, MOUSE, JOYSTICK and CUSTOM mode. With KEYBOARD mode the device can send any key code including the ALT, CTRL, SHIFT and GUI modifier keys. With MOUSE mode you can send the LEFT, RIGHT or CENTER mouse button events. With JOYSTICK mode you can send joystick button events 1 to 16. With CUSTOM mode you can use your custom software application to interface to the device (see Generation 2 examples below).
Supports all Major operating systems (32 and 64 bit).
Simple plug and play USB compliant device. Uses the systems USB HID driver, no drivers to load.